BFDGX - PRIMER,728-010,PRETREATMENT FORMULA 117B
- MSDS: BFDGX
- Manufacturer: AMERON INDUSTRIAL COATINGS DIV
- Product Name: PRIMER,728-010,PRETREATMENT FORMULA 117B
- National Stock Number: 8030-00-535-9780
Product Identification
Product ID:PRIMER,728-010,PRETREATMENT FORMULA 117B
MSDS Date:01/01/1985
FSC:8030
NIIN:00-535-9780
MSDS Number: BFDGX
Responsible Party
BREA, CA 92621-3904
US
Emergency Phone: 714-529-4597
Info Phone: 714-529-4597
Cage: 09869
Contractor
Telephone: 714-529-4597
Cage: 09869
Ingredients
ISOPROPYL ALCOHOL (SARA III)
CAS: 67-63-0
RTECS: NT8050000
Fraction By Weight: 52.7%
OSHA PEL 400 PPM/500 STEL
ACGIH TLV: 400 PPM/500STEL;9192
N-BUTYL ALCOHOL (SARA III)
CAS: 71-36-3
RTECS: EO1400000
Fraction By Weight: 19.3%
OSHA PEL 100 PPM
ACGIH TLV: S, C 50 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ZINC CHROMATE
CAS: 13530-65-9
RTECS: GB3290000
Fraction By Weight: 8.4%
OSHA PEL 0.1 MG/M3 (CRO3)
ACGIH TLV: 0.01MG/M3(CR)A1;9192
Hazards
Effects of Overexposure:INHS:ANESTHETIC, IRRIT OF RESP TRACT OR ACUTE
CNS DEPRSSN W/HDACHE,DIZ,UNCON,COMA. SKIN & EYES:IRRIT
First Aid
First Aid:.IN CASE OF CONTACT, FLUSH SKIN & EYES W/PLENTY OF WATER
WHILE REMOVING CONTAMINATED CLOTHING. IF INHALED, REMOVE TO GRESH
AIR. CALL A PHYSICIAN IF SYMPTOMS PERSIST.
Fire Fighting
Flash Point:59F TCC
Lower Limits:2.5
Extinguishing Media:SM FIRES:CO*2, DRY CHEM. LG FIRES:POLYMER FOAM
PREFERRED
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS
Unusual Fire/Explosion Hazard:CLOSED CONTANERS EXPOSED TO HEAT MAY
EXPLODE DUE TO PRESSURE BUILD-UP.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION (FLAME, HOT
SURFACES, & ELECTRICAL, STATIC, OR FRICTIONAL SPARKS).AVOID
BREATHING VAPORS. VENTILATE AREA.REMOVE W/INERT ABSORBENT &
NON-SPARKING TOOLS.
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 120F.STORE LG QTY
IN BLDG DESIGNED TO STORE NFPA CLASS ONE FLAM LIQ. DO NOT TAKE
INTERNALLY.ADD LABEL WARNING.
Other Precautions:GROUND CONTAINERS WHEN POURING. AVOID FREE FALL OF
LIQ.IN EXCESS OF FEW IN. DO NOT FLAME CUT, BRAZE OR WELD COATED
MATERIAL W/O APPROVED RESPIRATOR OR APPROPRIATE VENTILATION.
DOT:FLAM LIQ.
Exposure Controls
Respiratory Protection:RESTRICT VENT:CHEM-MECH FLTR.CLSD:AIR-LINE TYPE
Ventilation:GEN DILTN/LOCAL EXHST TO KEEP TLV/LEL BELOW LIMIT, REMV
FUME
Protective Gloves:YES
Eye Protection:YES, FOR SPLASH
Other Protective Equipment:AVOID LONG EXPOSURE TO CONTAMINATED
CLOTHING.
Supplemental Safety and Health
VAPOR PRESSURE:31.2;VAPOR DENSITY:HEAVIER THAN AIR;WT PER GALLON:7.8
LS. AOT-LD50 IS 1.8G/KG FOR ZINC CHROMATE.
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:175-2088F
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:87.7
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:AVOID FIRES, HEAT & HOT SURFACES.
Disposal
Waste Disposal Methods:DO NOT INCINERATE CLOSED CONTANER.DISPOSE IN
ACCORDANCE W/FED.,STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.